90 lines
3.1 KiB
Plaintext
90 lines
3.1 KiB
Plaintext
|
CDRTOOLS compiles without changes on any UnixWare 7.0.1 or later installation
|
|||
|
|
having the UnixWare/OpenServer DevKit (UODK) or GCC-2.95 and smake-1.2
|
|||
|
|
installed.
|
|||
|
|
|
|||
|
|
You can get pre-packaged, pkgadd installable binaries from:
|
|||
|
|
|
|||
|
|
http://www.sco.com/skunkware/cdrtools
|
|||
|
|
|
|||
|
|
Some general notes on CDRTOOLS are available from:
|
|||
|
|
|
|||
|
|
http://www.sco.com/skunkware/cdrtools/SCO-NOTES.html
|
|||
|
|
|
|||
|
|
|
|||
|
|
Limitations for CDRTOOLS-1.8 on UnixWare:
|
|||
|
|
|
|||
|
|
1) SCO UnixWare 2.1.X and UnixWare 7.0.0 are not supported
|
|||
|
|
- UW2.1.X will compile/work with little changes
|
|||
|
|
- UW7.0.0 wasn't tested at all
|
|||
|
|
|
|||
|
|
2) There is only support for SCSI devices
|
|||
|
|
|
|||
|
|
3) UnixWare 7.0.1 requires additional PTF's to enable some
|
|||
|
|
host bus adapters to work with a logical block size of more than
|
|||
|
|
512 bytes. (Please see the above SCO_NOTES document for details!)
|
|||
|
|
|
|||
|
|
===================================================================
|
|||
|
|
NOTE: cdrecord now supports the -scanbus option. Therefore the
|
|||
|
|
old addressing methods are NO LONGER AVAILABLE !!!
|
|||
|
|
|
|||
|
|
As UnixWare 7.1.1 doesn't allow to open the passthrough
|
|||
|
|
interface for disks, this is disabled by default.
|
|||
|
|
cdrecord -scanbus will therefore only list devices other
|
|||
|
|
than disks. To enable the scanning of disks, you need to
|
|||
|
|
set an environment variable "LIBSCG_SCAN_ALL".
|
|||
|
|
|
|||
|
|
Be warned, doing so might lock your disk subsystem!
|
|||
|
|
===================================================================
|
|||
|
|
|
|||
|
|
The correct dev= syntax on UnixWare 7 is:
|
|||
|
|
|
|||
|
|
dev=scsibus,target,lun (and scsibus is scsibus now!!!)
|
|||
|
|
|
|||
|
|
A sample output from cdrecord -scanbus looks like:
|
|||
|
|
|
|||
|
|
#cdrecord -scanbus
|
|||
|
|
Cdrecord 1.8 (i586-sco-sysv5uw7.0.1) Copyright (C) 1995-2000 J<>rg Schilling
|
|||
|
|
Using libscg version 'schily-0.1'
|
|||
|
|
scsibus0:
|
|||
|
|
0,0,0 0) 'SEAGATE ' 'ST34573LC ' '5960' Disk
|
|||
|
|
0,1,0 1) 'SEAGATE ' 'ST34573LC ' '5960' Disk
|
|||
|
|
0,2,0 2) 'SEAGATE ' 'ST34573LC ' '5960' Disk
|
|||
|
|
0,3,0 3) *
|
|||
|
|
0,4,0 4) *
|
|||
|
|
0,5,0 5) 'PIONEER ' 'CD-ROM DR-U06S ' '1.05' Removable CD-ROM
|
|||
|
|
0,6,0 6) 'TEAC ' 'CD-R56S ' '1.0E' Removable CD-ROM
|
|||
|
|
0,7,0 7) *
|
|||
|
|
|
|||
|
|
The first column showing the triple x,y,z tells you the address to use.
|
|||
|
|
|
|||
|
|
As you can see the TEAC CD-R56S CD-Writer does have the following address:
|
|||
|
|
|
|||
|
|
dev=0,6,0
|
|||
|
|
|
|||
|
|
===================================================================
|
|||
|
|
THE OLD ADDRESSING IS NO LONGER AVAILABLE!
|
|||
|
|
|
|||
|
|
PLEASE ADJUST YOUR /etc/default/cdrecord FILES!
|
|||
|
|
===================================================================
|
|||
|
|
|
|||
|
|
Running cdrecord with the old address method will result in an error!
|
|||
|
|
|
|||
|
|
#cdrecord dev=/dev/rcdrom/cdrom1:6,0 -inq
|
|||
|
|
Cdrecord 1.8 (i386-pc-sco3.2v5.0.5) Copyright (C) 1995-2000 J<>rg Schilling
|
|||
|
|
scsidev: '/dev/rcd1:6,0'
|
|||
|
|
devname: '/dev/rcd1'
|
|||
|
|
scsibus: 0 target: 6 lun: 0
|
|||
|
|
cdrecord: Invalid argument. Open by 'devname' no longer supported on this OS. Cannot open SCSI driver.
|
|||
|
|
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
|
|||
|
|
|
|||
|
|
|
|||
|
|
To compile cdrtools, you need 'smake' from:
|
|||
|
|
|
|||
|
|
ftp://ftp.sco.com/skunkware/uw7/Packages
|
|||
|
|
|
|||
|
|
|
|||
|
|
or 'gmake'. Smake is preferred as gmake bugs will cause bogus warnings
|
|||
|
|
and may confuse about the state of the make run.
|
|||
|
|
|
|||
|
|
|