cdrtools/doc/scgskeleton.ps

%!PS
%%Version: 3.15
%%DocumentFonts: (atend)
%%Pages: (atend)
%%EndComments
%
% Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
% Use is subject to license terms.
%
% CDDL HEADER START
%
% The contents of this file are subject to the terms of the
% Common Development and Distribution License, Version 1.0 only
% (the "License").  You may not use this file except in compliance
% with the License.
%
% You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
% or http://www.opensolaris.org/os/licensing.
% See the License for the specific language governing permissions
% and limitations under the License.
%
% When distributing Covered Code, include this CDDL HEADER in each
% file and include the License file at usr/src/OPENSOLARIS.LICENSE.
% If applicable, add the following below this CDDL HEADER, with the
% fields enclosed by brackets "[]" replaced with your own identifying
% information: Portions Copyright [yyyy] [name of copyright owner]
%
% CDDL HEADER END
%
%ident	"%Z%%M%	%I%	%E% SMI"
%
% Version 3.16 prologue for troff files.
%

/#copies 1 store
/aspectratio 1 def
/formsperpage 1 def
/landscape false def
/linewidth .3 def
/magnification 1 def
/margin 0 def
/orientation 0 def
/resolution 720 def
/xoffset 0 def
/yoffset 0 def

/roundpage true def
/useclippath true def
/pagebbox [0 0 612 792] def

/R  /Times-Roman def
/I  /Times-Italic def
/B  /Times-Bold def
/BI /Times-BoldItalic def
/H  /Helvetica def
/HI /Helvetica-Oblique def
/HB /Helvetica-Bold def
/HX /Helvetica-BoldOblique def
/CW /Courier def
/CO /Courier def
/CI /Courier-Oblique def
/CB /Courier-Bold def
/CX /Courier-BoldOblique def
/PA /Palatino-Roman def
/PI /Palatino-Italic def
/PB /Palatino-Bold def
/PX /Palatino-BoldItalic def
/Hr /Helvetica-Narrow def
/Hi /Helvetica-Narrow-Oblique def
/Hb /Helvetica-Narrow-Bold def
/Hx /Helvetica-Narrow-BoldOblique def
/KR /Bookman-Light def
/KI /Bookman-LightItalic def
/KB /Bookman-Demi def
/KX /Bookman-DemiItalic def
/AR /AvantGarde-Book def
/AI /AvantGarde-BookOblique def
/AB /AvantGarde-Demi def
/AX /AvantGarde-DemiOblique def
/NR /NewCenturySchlbk-Roman def
/NI /NewCenturySchlbk-Italic def
/NB /NewCenturySchlbk-Bold def
/NX /NewCenturySchlbk-BoldItalic def
/ZD /ZapfDingbats def
/ZI /ZapfChancery-MediumItalic def
/VR /Varitimes#Roman def
/VI /Varitimes#Italic def
/VB /Varitimes#Bold def
/VX /Varitimes#BoldItalic def
/S  /S def
/S1 /S1 def
/GR /Symbol def

/inch {72 mul} bind def
/min {2 copy gt {exch} if pop} bind def

/setup {
	counttomark 2 idiv {def} repeat pop

	landscape {/orientation 90 orientation add def} if
	/scaling 72 resolution div def
	linewidth setlinewidth
	1 setlinecap

	pagedimensions
	xcenter ycenter translate
	orientation neg rotate
	width 2 div neg height 2 div translate
	xoffset inch yoffset inch translate
	margin 2 div dup neg translate
	magnification dup aspectratio mul scale
	scaling scaling scale

	/Symbol /S Sdefs cf
	/Times-Roman /S1 S1defs cf
	0 0 moveto
} def

/pagedimensions {
	useclippath userdict /gotpagebbox known not and {
		/pagebbox [clippath pathbbox newpath] def
		roundpage currentdict /roundpagebbox known and {roundpagebbox} if
	} if
	pagebbox aload pop
	4 -1 roll exch 4 1 roll 4 copy
	landscape {4 2 roll} if
	sub /width exch def
	sub /height exch def
	add 2 div /xcenter exch def
	add 2 div /ycenter exch def
	userdict /gotpagebbox true put
} def

/pagesetup {
	/page exch def
	currentdict /pagedict known currentdict page known and {
		page load pagedict exch get cvx exec
	} if
} def

/decodingdefs [
	{counttomark 2 idiv {y moveto show} repeat}
	{neg /y exch def counttomark 2 idiv {y moveto show} repeat}
	{neg moveto {2 index stringwidth pop sub exch div 0 32 4 -1 roll widthshow} repeat}
	{neg moveto {spacewidth sub 0.0 32 4 -1 roll widthshow} repeat}
	{counttomark 2 idiv {y moveto show} repeat}
	{neg setfunnytext}
] def

/setdecoding {/t decodingdefs 3 -1 roll get bind def} bind def

/w {neg moveto show} bind def
/m {neg dup /y exch def moveto} bind def
/done {/lastpage where {pop lastpage} if} def

/f {
	dup /font exch def findfont exch
	dup /ptsize exch def scaling div dup /size exch def scalefont setfont
	linewidth ptsize mul scaling 10 mul div setlinewidth
	/spacewidth ( ) stringwidth pop def
} bind def

/changefont {
	/fontheight exch def
	/fontslant exch def
	currentfont [
		1 0
		fontheight ptsize div fontslant sin mul fontslant cos div
		fontheight ptsize div
		0 0
	] makefont setfont
} bind def

/sf {f} bind def

/cf {
	dup length 2 idiv
	/entries exch def
	/chtab exch def
	/newfont exch def

	findfont dup length 1 add dict
	/newdict exch def
	{1 index /FID ne {newdict 3 1 roll put} {pop pop} ifelse} forall

	newdict /Metrics entries dict put
	newdict /Metrics get
	begin
		chtab aload pop
		1 1 entries {pop def} for
		newfont newdict definefont pop
	end
} bind def

%
% A few arrays used to adjust reference points and character widths in some
% of the printer resident fonts. If square roots are too high try changing
% the lines describing /radical and /radicalex to,
%
%	/radical	[0 -75 550 0]
%	/radicalex	[-50 -75 500 0]
%

/Sdefs [
	/bracketlefttp		[220 500]
	/bracketleftbt		[220 500]
	/bracketrighttp		[-70 380]
	/bracketrightbt		[-70 380]
	/braceleftbt		[220 490]
	/bracketrightex		[220 -125 500 0]
	/radical		[0 0 550 0]
	% NeWSprint's \(br is too low, compensate
	statusdict /product get (NeWS Server) eq {
		/radicalex		[-50 100 500 0]
		/parenleftex		[-20 100 0 0]

	} {
		/radicalex		[-50 0 500 0]
		/parenleftex		[-20 -170 0 0]
	} ifelse
	/integral		[100 -50 500 0]
	/infinity		[10 -75 730 0]
] def

/S1defs [
	/underscore		[0 80 500 0]
	/endash			[7 90 650 0]
] def
%%EndProlog
%%BeginSetup
mark
/resolution 720 def
setup
2 setdecoding
%%EndSetup
%%Page: 1 1
save
mark
1 pagesetup
10 R f
(Schily)720 480 w
10 S1 f
(\302)976 480 w
10 R f
( \( 1L \))3 225( SCGSKELETON)1 3216(s USER COMMANDS)2 950 3 1009 480 t
9 B f
( E)1 0( ME)1 60(N NA AM)2 215 3 720 960 t
10 R f
(scgskeleton)1080 1080 w
10 S1 f
(\261)1579 1080 w
10 R f
(Skeleton program for SCSI transport using libscg)6 2025 1 1677 1080 t
9 B f
( S)1 0( IS)1 50( SI)1 35( PS)1 50( OP)1 55( YN NO)2 135(S SY)1 115 7 720 1248 t
10 B f
( =)1 0( v=)1 57( ev)1 50( de)1 44( d)1 89( n)1 0( on)1 56( to)1 50( et)1 33( le)1 44( el)1 28( ke)1 44( sk)1 56( gs)1 39( cg)1 50(s sc)1 83 16 1080 1368 t
10 I f
(device)1803 1368 w
10 R f
([)2090 1368 w
10 I f
(options)2156 1368 w
10 R f
(])2484 1368 w
9 B f
( N)1 0( ON)1 65( IO)1 70( TI)1 35( PT)1 60( IP)1 55( CR RI)2 100( SC)1 65( ES)1 50(D DE)1 125 10 720 1536 t
10 B f
( n)1 0( on)1 56( to)1 50( et)1 33( le)1 44( el)1 28( ke)1 44( sk)1 56( gs)1 39( cg)1 50(S Sc)1 100 11 1080 1656 t
10 R f
( demonstrate the interfaces and capabilities of the SCSI transport)9 2755(is s skeleton program to)4 1023 2 1622 1656 t
(library)1080 1776 w
10 B f
( g)1 0( cg)1 50( sc)1 44( bs)1 39(l li ib)2 112 5 1379 1776 t
10 R f
(.)1624 1776 w
9 B f
( g)1 0( ng)1 45( in)1 50( mi)1 25( am)1 75( na)1 45( n)1 80( ce e)2 40( ic)1 40( vi)1 25( ev)1 45(D De)1 105 12 900 1944 t
10 R f
( possible device name parameters call)5 1585(For a list of)3 506 2 1080 2064 t
10 B f
( n)1 0( on)1 56( to)1 50( et)1 33( le)1 44( el)1 28( ke)1 44( sk)1 56( gs)1 39( cg)1 50(s sc)1 83 11 3211 2064 t
10 S1 f
(\261 \261)1 65 1 3734 2064 t
10 B f
( s)1 0( nb bu us)3 151( an)1 56( ca)1 50(s sc)1 83 5 3799 2064 t
10 R f
(or)4179 2064 w
10 B f
( p)1 0( lp)1 56( el)1 28( he)1 44( =h)1 56( v=)1 57( ev)1 50( de)1 44( d)1 96( n)1 0( on)1 56( to)1 50( et)1 33( le)1 44( el)1 28( ke)1 44( sk)1 56( gs)1 39( cg)1 50(s sc)1 83 20 4302 2064 t
10 R f
(and)5256 2064 w
(then use the right)3 715 1 1080 2184 t
10 B f
( =)1 0( v=)1 57( ev)1 50(d de)1 100 4 1828 2184 t
10 R f
(parameter based on the device listing.)5 1548 1 2068 2184 t
9 B f
( S)1 0( NS)1 50( ON)1 65( IO)1 70( TI)1 35( PT)1 60(O OP)1 125 7 720 2472 t
10 S1 f
(\261 \261)1 65 1 1080 2592 t
10 B f
( p)1 0( lp)1 56( el)1 28(h he)1 100 4 1145 2592 t
10 R f
(Prints a short summary of the)5 1220 1 1440 2592 t
10 B f
(p p)1 56 1 2693 2592 t
10 R f
(options and exists.)2 758 1 2782 2592 t
10 S1 f
(\261 \261)1 65 1 1080 2760 t
10 B f
( n)1 0( on)1 56( io)1 50( si)1 28( er rs)2 83(v ve)1 94 6 1145 2760 t
10 R f
(Print version information and exit.)4 1412 1 1440 2880 t
10 B f
( =)1 0( v=)1 57( ev)1 50(d de)1 100 4 1080 3048 t
10 I f
(target)1287 3048 w
10 R f
( typical target dev-)3 796( A)1 145(Set the SCSI target for the CD/DVD/BluRay-Recorder, see notes above.)9 3019 3 1440 3168 t
(ice speci\256cation is)2 762 1 1440 3288 t
10 B f
( =)1 0( v=)1 57( ev)1 50(d de)1 100 4 2239 3288 t
10 I f
(1,6,0)2446 3288 w
10 R f
( a \256lename must be provided together with the numerical tar-)10 2556(. If)1 161 2 2683 3288 t
( correct \256lename in this case can)6 1374( The)1 225( implementation speci\256c.)2 1032(get speci\256cation, the \256lename is)4 1329 4 1440 3408 t
( a)1 81( On)1 192( the system speci\256c manuals of the target operating system.)9 2483(be found in)2 481 4 1440 3528 t
10 I f
(FreeBSD)4714 3528 w
10 R f
(system)5122 3528 w
(without)1440 3648 w
10 I f
(CAM)1780 3648 w
10 R f
( use the control device \(e.g.)5 1150(support, you need to)3 843 2 2025 3648 t
10 I f
(/dev/rcd0.ctl)4086 3648 w
10 R f
( correct device)2 606(\). A)1 198 2 4596 3648 t
(speci\256cation in this case may be)5 1330 1 1440 3768 t
10 B f
( =)1 0( v=)1 57( ev)1 50(d de)1 100 4 2803 3768 t
10 I f
(/dev/rcd0.ctl:)3010 3768 w
10 S1 f
(@)3545 3768 w
10 R f
(.)3670 3768 w
10 B f
( g)1 0( ng)1 50( in)1 56( ss si)2 67( re es)2 83( dd dr)2 100( ad)1 56( a)1 83( I)1 0( SI)1 39( CS)1 56( SC)1 72( S)1 89( l)1 0( al)1 28( er ra)2 94( ne)1 44( en)1 56(G Ge)1 122 19 1240 4008 t
10 R f
(The)1440 4128 w
10 I f
(target device)1 548 1 1650 4128 t
10 R f
(to the)1 255 1 2253 4128 t
10 B f
( =)1 0( v=)1 57( ev)1 50(d de)1 100 4 2563 4128 t
10 R f
(option refers to)2 670 1 2825 4128 t
10 I f
(scsibus)3550 4128 w
10 R f
(/)3847 4128 w
10 I f
(target)3875 4128 w
10 R f
(/)4122 4128 w
10 I f
(lun)4150 4128 w
10 R f
(of the CD/DVD/BluRay-)2 1067 1 4333 4128 t
(Recorder. Communication on)2 1211 1 1440 4248 t
10 I f
(SunOS)2689 4248 w
10 R f
( the SCSI general driver)4 1013(is done with)2 515 2 2999 4248 t
10 B f
( .)1 0( g.)1 25( cg)1 50(s sc)1 83 4 4564 4248 t
10 R f
(Other operating)1 641 1 4759 4248 t
( is:)1 189( syntax)1 354( Possible)1 460(systems are using a library simulation of this driver.)8 2623 4 1440 4368 t
10 B f
( =)1 0( v=)1 57( ev)1 50(d de)1 100 4 5193 4368 t
10 I f
(scsibus)1440 4488 w
10 R f
(,)1737 4488 w
10 I f
(target)1762 4488 w
10 R f
(,)2009 4488 w
10 I f
(lun)2034 4488 w
10 R f
(or)2201 4488 w
10 B f
( =)1 0( v=)1 57( ev)1 50(d de)1 100 4 2323 4488 t
10 I f
(target)2569 4488 w
10 R f
(,)2816 4488 w
10 I f
(lun)2841 4488 w
10 R f
( to)1 116( the latter case, the CD/DVD/BluRay-Recorder has)6 2127(. In)1 180 3 2977 4488 t
( SCSI bus of the machine.)5 1184(be connected to the default)4 1183 2 1440 4608 t
10 I f
(Scsibus)3893 4608 w
10 R f
(,)4201 4608 w
10 I f
(target)4279 4608 w
10 R f
(and)4571 4608 w
10 I f
(lun)4768 4608 w
10 R f
(are integer)1 451 1 4949 4608 t
( require to specify a)4 852(numbers. Some operating systems or SCSI transport implementations may)8 3108 2 1440 4728 t
( this case the correct syntax for the device is:)9 2441( In)1 213(\256lename in addition.)2 969 3 1440 4848 t
10 B f
( =)1 0( v=)1 57( ev)1 50(d de)1 100 4 5193 4848 t
10 I f
(devicename)1440 4968 w
10 R f
(:)1918 4968 w
10 I f
(scsibus)1946 4968 w
10 R f
(,)2243 4968 w
10 I f
(target)2268 4968 w
10 R f
(, or)1 143 1 2515 4968 t
10 B f
( =)1 0( v=)1 57( ev)1 50(d de)1 100 4 2693 4968 t
10 I f
(devicename)2935 4968 w
10 R f
(:)3413 4968 w
10 I f
(target)3441 4968 w
10 R f
(,)3688 4968 w
10 I f
(lun)3713 4968 w
10 R f
( the name of the device node that)7 1392(. If)1 159 2 3849 4968 t
( the form)2 390(has been speci\256ed on such a system refers to exactly one SCSI device, a shorthand in)15 3570 2 1440 5088 t
10 B f
( =)1 0( v=)1 57( ev)1 50(d de)1 100 4 1440 5208 t
10 I f
(devicename)1756 5208 w
10 R f
(:)2234 5208 w
10 S1 f
(@)2262 5208 w
10 R f
(or)2463 5208 w
10 B f
( =)1 0( v=)1 57( ev)1 50(d de)1 100 4 2655 5208 t
10 I f
(devicename)2971 5208 w
10 R f
(:)3449 5208 w
10 S1 f
(@)3477 5208 w
10 R f
(,)3577 5208 w
10 I f
(lun)3602 5208 w
10 R f
(may be used instead of)4 1247 1 3838 5208 t
10 B f
( =)1 0( v=)1 57( ev)1 50(d de)1 100 4 5193 5208 t
10 I f
(devicename)1440 5328 w
10 R f
(:)1918 5328 w
10 I f
(scsibus)1946 5328 w
10 R f
(,)2243 5328 w
10 I f
(target)2268 5328 w
10 R f
(,)2515 5328 w
10 B f
( g)1 0( ng)1 50( in)1 56( ss si)2 67( re es)2 83( dd dr)2 100( ad)1 56( a)1 83( I)1 0( SI)1 39( CS)1 56( SC)1 72( S)1 89( e)1 0( te)1 44( ot)1 33( mo)1 50( em)1 83(R Re)1 116 19 1240 5568 t
10 R f
( to prepend the SCSI device name by a remote device)10 2240(To access remote SCSI devices, you need)6 1720 2 1440 5688 t
(indicator. The remote device indicator is either)6 1961 1 1440 5808 t
10 B f
( :)1 0( TE E:)2 100( OT)1 67( MO)1 78( EM)1 94(R RE)1 139 6 3441 5808 t
10 I f
(user)3919 5808 w
10 S1 f
(@)4091 5808 w
10 I f
(host:)4183 5808 w
10 R f
(or)4456 5808 w
10 B f
( :)1 0( TE E:)2 100( OT)1 67( MO)1 78( EM)1 94(R RE)1 139 6 4578 5808 t
10 I f
(host:)5056 5808 w
10 R f
(A)5328 5808 w
(valid remote SCSI device name may be:)6 1741 1 1440 5928 t
10 B f
( :)1 0( TE E:)2 100( OT)1 67( MO)1 78( EM)1 94(R RE)1 139 6 3261 5928 t
10 I f
(user)3739 5928 w
10 S1 f
(@)3911 5928 w
10 I f
(host:)4003 5928 w
10 R f
( bus)1 187(to allow remote SCSI)3 930 2 4283 5928 t
(scanning or)1 482 1 1440 6048 t
10 B f
( :)1 0( TE E:)2 100( OT)1 67( MO)1 78( EM)1 94(R RE)1 139 6 1966 6048 t
10 I f
(user)2444 6048 w
10 S1 f
(@)2616 6048 w
10 I f
(host:1,0,0)2708 6048 w
10 R f
( SCSI device at)3 673(to access the)2 542 2 3152 6048 t
10 I f
(host)4410 6048 w
10 R f
(connected to SCSI)2 780 1 4620 6048 t
(bus)1440 6168 w
10 S1 f
(#)1614 6168 w
10 R f
( to a speci\256c)3 535( order to allow remote access)5 1216( In)1 151(1,target 0, lun 0.)3 685 4 1699 6168 t
10 I f
(host)4322 6168 w
10 R f
(, the)1 183 1 4497 6168 t
10 B f
( i)1 0( si)1 28( cs)1 39( sc)1 44(r rs)1 83 5 4716 6168 t
10 R f
(\(1\) program)1 490 1 4910 6168 t
(needs to be present and con\256gured on the)7 1711 1 1440 6288 t
10 I f
(host)3184 6288 w
10 R f
(.)3359 6288 w
10 B f
( s)1 0( ts)1 39( rt)1 33( or)1 44( po)1 50( sp)1 56( ns)1 39( an)1 56( ra)1 50( tr)1 44( t)1 66( I)1 0( SI)1 39( CS)1 56( SC)1 72( S)1 89( e)1 0( te)1 44( at)1 33( na)1 50( er rn)2 100( te)1 44( lt)1 33(A Al)1 100 24 1240 6528 t
( I)1 0( PI)1 39( AP)1 61( TA)1 72(A AT)1 139 5 1440 6648 t
10 R f
(drives are just)2 584 1 1788 6648 t
10 B f
( I)1 0( SI)1 39( CS)1 56(S SC)1 128 4 2409 6648 t
10 R f
(drives that inherently use the)4 1202 1 2669 6648 t
10 I f
(ATA packet interface)2 867 1 3908 6648 t
10 R f
(as)4813 6648 w
10 B f
( I)1 0( SI)1 39( CS)1 56(S SC)1 128 4 4934 6648 t
10 R f
(com-)5195 6648 w
( may need to specify an alternate)6 1367( You)1 239( IDE \(ATA\) transport.)3 919(mand transport layer build into the)5 1435 4 1440 6768 t
( if your OS does not implement a fully integrated kernel)10 2402( line)1 224(transport layer on the command)4 1334 3 1440 6888 t
( allows to access any drive using)6 1357(driver subsystem that)2 873 2 1440 7008 t
10 B f
( I)1 0( SI)1 39( CS)1 56(S SC)1 128 4 3703 7008 t
10 R f
(commands via a single unique user)5 1441 1 3959 7008 t
(interface.)1440 7128 w
(J)720 7680 w
(. .)1 47 1 759 7625 t
( 1)1 1838( change: 2010/05/13)2 832( Last)1 1443(org Schilling)1 528 4 759 7680 t
cleartomark
showpage
restore
%%EndPage: 1 1
%%Page: 2 2
save
mark
2 pagesetup
10 R f
(Schily)720 480 w
10 S1 f
(\302)976 480 w
10 R f
( \( 1L \))3 225( SCGSKELETON)1 3216(s USER COMMANDS)2 950 3 1009 480 t
( devices via alternate transport layers, you need to prepend the SCSI device)12 3289(To access SCSI)2 671 2 1440 960 t
( indicator may be something like)5 1468( transport layer)2 668( The)1 245(name by a transport layer indicator.)5 1579 4 1440 1080 t
10 B f
( :)1 0( I:)1 33( SI)1 39( CS)1 56( SC)1 72(U US)1 128 6 1440 1200 t
10 R f
(or)1812 1200 w
10 B f
( :)1 0( I:)1 33( PI)1 39( AP)1 61( TA)1 72(A AT)1 139 6 1939 1200 t
10 R f
( of supported transport layers for your platform, use)8 2231( get a list)3 421(. To)1 213 3 2283 1200 t
10 B f
( =)1 0( v=)1 57( ev)1 50(d de)1 100 4 5193 1200 t
10 I f
(HELP)1440 1320 w
10 R f
(:)1698 1320 w
10 B f
( un nd d)3 112( ou)1 56( ro)1 50( gr)1 44( kg)1 50( ck)1 56( ac)1 44( Ba)1 50( B)1 100( y)1 0( ty)1 50( il li it)3 89( bi)1 28( ab)1 56( ta)1 50( rt)1 33( or)1 44(P Po)1 111 18 1240 1560 t
10 R f
(To make)1 472 1 1440 1680 t
10 B f
( n)1 0( on)1 56( to)1 50( et)1 33( le)1 44( el)1 28( ke)1 44( sk)1 56( gs)1 39( cg)1 50(s sc)1 83 11 2057 1680 t
10 R f
(portable to all)2 795 1 2685 1680 t
8 R f
(UNIX)3618 1680 w
10 R f
(platforms, the syntax)2 1083 1 3964 1680 t
10 B f
( =)1 0( v=)1 57( ev)1 50(d de)1 100 4 5193 1680 t
10 I f
(devicename)1440 1800 w
10 R f
(:)1918 1800 w
10 I f
(scsibus)1946 1800 w
10 R f
(,)2243 1800 w
10 I f
(target)2268 1800 w
10 R f
( device names)2 599(, is preferred as it hides OS speci\256c knowledge about)9 2286 2 2515 1800 t
( \256le)1 171( speci\256c OS may not necessarily support a way to specify a real device)13 3051( A)1 147(from the user.)2 591 4 1440 1920 t
(name nor a way to specify)5 1090 1 1440 2040 t
10 I f
(scsibus)2563 2040 w
10 R f
(,)2860 2040 w
10 I f
(target)2885 2040 w
10 R f
(,)3132 2040 w
10 I f
(lun)3157 2040 w
10 R f
(.)3293 2040 w
10 I f
(Scsibus)1440 2280 w
10 R f
( the machine. Watch the boot messages for more informa-)9 2434(0 is the default SCSI bus on)6 1189 2 1777 2280 t
(tion or look into)3 675 1 1440 2400 t
10 B f
( s)1 0( es)1 39( ag ge)2 94( ss sa)2 89( es)1 39( me)1 44( /m)1 83( m/)1 28( dm)1 83( ad)1 56( /a)1 50( r/)1 28( va ar)2 94(/ /v)1 78 14 2149 2400 t
10 R f
(for more information about the SCSI con\256guration of your)8 2412 1 2988 2400 t
( you have problems to \256gure out what values for)9 2029(machine. If)1 497 2 1440 2520 t
10 I f
(scsibus)4001 2520 w
10 R f
(,)4298 2520 w
10 I f
(target)4323 2520 w
10 R f
(,)4570 2520 w
10 I f
(lun)4595 2520 w
10 R f
(should be used,)2 641 1 4759 2520 t
(try the)1 266 1 1440 2640 t
10 S1 f
(\261 \261)1 65 1 1739 2640 t
10 B f
( s)1 0( nb bu us)3 151( an)1 56( ca)1 50(s sc)1 83 5 1804 2640 t
10 R f
(option of)1 372 1 2177 2640 t
10 B f
( n)1 0( on)1 56( to)1 50( et)1 33( le)1 44( el)1 28( ke)1 44( sk)1 56( gs)1 39( cg)1 50(s sc)1 83 11 2582 2640 t
10 R f
(described below.)1 684 1 3098 2640 t
10 B f
( s)1 0( ce es)2 83( ic)1 44( vi)1 28( ev)1 50( de)1 44( d)1 89( r)1 0( or)1 44( fo)1 50( f)1 66( s)1 0( es)1 39( me)1 44( am)1 83( na)1 50( n)1 89( l)1 0( al)1 28( ca)1 50( ic)1 44( og gi)2 78( lo)1 50( l)1 61( g)1 0( ng)1 50( in)1 56( si)1 28(U Us)1 111 29 1240 2880 t
10 R f
(If no)1 213 1 1440 3000 t
10 I f
(dev)1700 3000 w
10 R f
(option is present,)2 732 1 1885 3000 t
10 B f
( n)1 0( on)1 56( to)1 50( et)1 33( le)1 44( el)1 28( ke)1 44( sk)1 56( gs)1 39( cg)1 50(s sc)1 83 11 2665 3000 t
10 R f
(will try to get the device from the)7 1501 1 3196 3000 t
10 B f
(C CD DR R)3 216 1 4745 3000 t
10 S f
(_ _)1 50 1 4961 3000 t
10 B f
( E)1 0( CE)1 67( IC)1 72( VI)1 39( EV)1 72(D DE)1 139 6 5011 3000 t
10 R f
(environment.)1440 3120 w
( the argument to the)4 1007(If a \256le /etc/default/cdrecord exists, and if)6 1977 2 1440 3360 t
10 B f
( =)1 0( v=)1 57( ev)1 50(d de)1 100 4 4501 3360 t
10 R f
(option or the)2 615 1 4785 3360 t
10 B f
(C CD DR R)3 216 1 1440 3480 t
10 S f
(_ _)1 50 1 1656 3480 t
10 B f
( E)1 0( CE)1 67( IC)1 72( VI)1 39( EV)1 72(D DE)1 139 6 1706 3480 t
10 R f
( not contain the characters ',', '/', ')7 1474(environment does)1 726 2 2133 3480 t
10 S1 f
(@)4333 3480 w
10 R f
(' or ':', it is interpreted)5 975 1 4425 3480 t
(as a device label name that was de\256ned in the \256le /etc/default/cdrecord \(see FILES section\).)14 3779 1 1440 3600 t
10 B f
( e)1 0( de)1 44( od)1 56( Mo)1 50( M)1 127( t)1 0( et)1 33( ge)1 44( rg)1 50( ar)1 44( ta)1 50( ot)1 33( to)1 50( ut)1 33(A Au)1 128 15 1240 3840 t
10 R f
(If no)1 203 1 1440 3960 t
10 B f
( =)1 0( v=)1 57( ev)1 50(d de)1 100 4 1680 3960 t
10 R f
( no)1 138(option and)1 437 2 1924 3960 t
10 B f
(C CD DR R)3 216 1 2537 3960 t
10 S f
(_ _)1 50 1 2753 3960 t
10 B f
( E)1 0( CE)1 67( IC)1 72( VI)1 39( EV)1 72(D DE)1 139 6 2803 3960 t
10 R f
(environment is present, or if it only contains a tran-)9 2170 1 3230 3960 t
(sport specifyer but no address notation,)5 1675 1 1440 4080 t
10 B f
( n)1 0( on)1 56( to)1 50( et)1 33( le)1 44( el)1 28( ke)1 44( sk)1 56( gs)1 39( cg)1 50(s sc)1 83 11 3160 4080 t
10 R f
(tries to scan the SCSI address space for)7 1712 1 3688 4080 t
( exactly one is found, this is used by default.)9 1851( If)1 132(CD-ROM drives.)1 702 3 1440 4200 t
10 B f
( =)1 0( t=)1 57( ut)1 33( ou)1 56( eo)1 50( me)1 44( im)1 83(t ti)1 61 8 1080 4368 t
10 S1 f
(#)1464 4368 w
10 R f
(Set the default SCSI command timeout value to)7 2139 1 1440 4488 t
10 S1 f
(#)3637 4488 w
10 R f
( default SCSI command)3 1060(seconds. The)1 587 2 3753 4488 t
( a SCSI command fails)4 982( If)1 139( commands.)1 498(timeout is the minimum timeout used for sending SCSI)8 2341 4 1440 4608 t
( a timeout, you may try to raise the default SCSI command timeout above the timeout)15 3696(due to)1 264 2 1440 4728 t
( runs correctly with a raised command timeout,)7 1991( the command)2 598( If)1 140(value of the failed command.)4 1231 4 1440 4848 t
( the author of the pro-)5 933(please report the better timeout value and the corresponding command to)10 3027 2 1440 4968 t
( no)1 133(gram. If)1 362 2 1440 5088 t
10 I f
(timeout)1968 5088 w
10 R f
(option is present, a default timeout of 40 seconds is used.)10 2367 1 2301 5088 t
10 B f
( =)1 0( g=)1 57( bu ug)2 106( eb)1 56(d de)1 100 5 1080 5256 t
10 S1 f
(#)1399 5256 w
10 I f
(,)1449 5256 w
10 B f
( d)1 0(- -d)1 89 2 1515 5256 t
10 R f
(Set the misc debug value to)5 1167 1 1440 5376 t
10 S1 f
(#)2645 5376 w
10 R f
(\(with debug=)1 549 1 2733 5376 t
10 S1 f
(#)3282 5376 w
10 R f
( the misc debug level by one \(with)7 1477(\) or increment)2 591 2 3332 5376 t
(-d\). If you specify)3 756 1 1440 5496 t
10 I f
(-dd,)2233 5496 w
10 R f
(this equals to)2 550 1 2427 5496 t
10 B f
( =)1 0( g=)1 57( bu ug)2 106( eb)1 56(d de)1 100 5 3013 5496 t
10 I f
(2.)3332 5496 w
10 R f
(This may help to \256nd problems while opening)7 1924 1 3476 5496 t
( Using)1 313( with sector sizes and sector types.)6 1474( well as)2 335( as)1 156(a driver for libscg.)3 782 5 1440 5616 t
10 S1 f
(\261 \261)1 65 1 4541 5616 t
10 B f
( g)1 0( bu ug)2 106( eb)1 56(d de)1 100 4 4606 5616 t
10 R f
(slows down)1 491 1 4909 5616 t
(the process and may be the reason for a buffer underrun.)10 2331 1 1440 5736 t
10 B f
( =)1 0( g=)1 57( bu ug)2 106( eb)1 56(k kd de)2 156 5 1080 5904 t
10 S1 f
(#)1455 5904 w
10 R f
(,)1505 5904 w
10 B f
( =)1 0(k kd d=)2 169 2 1563 5904 t
10 S1 f
(#)1732 5904 w
10 R f
(Tell the)1 316 1 1440 6024 t
10 B f
( g)1 0( cg)1 50(s sc)1 83 3 1789 6024 t
10 R f
(-driver to modify the kernel debug value while SCSI commands are running.)11 3156 1 1922 6024 t
10 S1 f
(\261 \261)1 65 1 1080 6192 t
10 B f
( t)1 0( nt)1 33( en)1 56( il le)2 72(s si)1 67 5 1145 6192 t
10 R f
(,)1373 6192 w
10 S1 f
(\261 \261)1 65 1 1431 6192 t
10 B f
(s s)1 39 1 1496 6192 t
10 R f
(Do not print out a status report for failed SCSI commands.)10 2420 1 1440 6312 t
10 S1 f
(\261 \261)1 65 1 1080 6480 t
10 B f
(v v)1 50 1 1145 6480 t
10 R f
( used e.g. to display the progress of the)8 1639( is)1 101( This)1 245(Increment the level of general verbosity by one.)7 1975 4 1440 6480 t
(process.)1440 6600 w
10 S1 f
(\261 \261)1 65 1 1080 6768 t
10 B f
(V V)1 72 1 1145 6768 t
10 R f
( helps to)2 383( This)1 258( verbose level with respect of SCSI command transport by one.)10 2747(Increment the)1 572 4 1440 6768 t
( during the process, that occur in the CD-Recorder. If you get incomprehensible)12 3308(debug problems)1 652 2 1440 6888 t
(error messages you should use this \257ag to get more detailed output.)11 2978 1 1440 7008 t
10 S1 f
(\261 \261)1 65 1 4502 7008 t
10 B f
(V VV V)2 144 1 4567 7008 t
10 R f
(will show data)2 637 1 4763 7008 t
( Using)1 320(buffer content in addition.)3 1112 2 1440 7128 t
10 S1 f
(\261 \261)1 65 1 2920 7128 t
10 B f
(V V)1 72 1 2985 7128 t
10 R f
(or)3104 7128 w
10 S1 f
(\261 \261)1 65 1 3234 7128 t
10 B f
(V VV V)2 144 1 3299 7128 t
10 R f
(slows down the process.)3 1037 1 3490 7128 t
10 S1 f
(\261 \261)1 65 1 4607 7128 t
10 B f
( s)1 0( nb bu us)3 151( an)1 56( ca)1 50(s sc)1 83 5 4672 7128 t
10 R f
(Scan all)1 341 1 5059 7128 t
( print the inquiry strings. This option may be used to \256nd)11 2416(SCSI devices on all SCSI busses and)6 1544 2 1440 7248 t
(J)720 7728 w
(. .)1 47 1 759 7673 t
( 2)1 1838( change: 2010/05/13)2 832( Last)1 1443(org Schilling)1 528 4 759 7728 t
cleartomark
showpage
restore
%%EndPage: 2 2
%%Page: 3 3
save
mark
3 pagesetup
10 R f
(Schily)720 480 w
10 S1 f
(\302)976 480 w
10 R f
( \( 1L \))3 225( SCGSKELETON)1 3216(s USER COMMANDS)2 950 3 1009 480 t
( numbers printed out as labels are computed by:)8 2010( The)1 225( on a system.)3 558(SCSI address of the devices)4 1167 4 1440 960 t
10 B f
( s)1 0(b bu us)2 151 2 1440 1080 t
10 S f
(* *)1 50 1 1624 1080 t
10 B f
( t)1 0( et)1 33( ge)1 44( rg)1 50( ar)1 44( ta)1 50( t)1 66( +)1 0( +)1 90(1 10 00 0)3 150 10 1707 1080 t
( =)1 0( s=)1 57(t ts)1 72 3 1080 1248 t
10 S1 f
(#)1209 1248 w
10 R f
(Set the maximum transfer size for a single SCSI command to)10 2558 1 1440 1248 t
10 S1 f
(#)4034 1248 w
10 R f
( the)1 159( syntax for)2 449(. The)1 249 3 4084 1248 t
10 B f
( =)1 0( s=)1 57(t ts)1 72 3 4978 1248 t
10 R f
(option)5144 1248 w
(is the same as for cdrecord fs=)6 1267 1 1440 1368 t
10 S1 f
(#)2707 1368 w
10 R f
(or sdd bs=)2 433 1 2790 1368 t
10 S1 f
(#)3223 1368 w
10 R f
(.)3273 1368 w
(If no)1 204 1 1440 1608 t
10 B f
( =)1 0( s=)1 57(t ts)1 72 3 1682 1608 t
10 R f
(option has been speci\256ed,)3 1071 1 1849 1608 t
10 B f
( n)1 0( on)1 56( to)1 50( et)1 33( le)1 44( el)1 28( ke)1 44( sk)1 56( gs)1 39( cg)1 50(s sc)1 83 11 2958 1608 t
10 R f
( If libscg)2 383(defaults to a transfer size of 256 kB.)7 1538 2 3479 1608 t
( from the operating system, the value is reduced to the maximum value that is)14 3245(gets lower values)2 715 2 1440 1728 t
( further reduce the)3 829( it may help to)4 702( Sometimes,)1 559(possible with the current operating system.)5 1870 4 1440 1848 t
( it may take a long time to \256nd a better value by)12 2131(transfer size or to enhance it, but note that)8 1829 2 1440 1968 t
(experimenting with the)2 943 1 1440 2088 t
10 B f
( =)1 0( s=)1 57(t ts)1 72 3 2416 2088 t
10 R f
(option.)2578 2088 w
9 B f
( S)1 0( LE ES)2 110( PL)1 60( MP)1 55( XA AM)2 150(E EX)1 125 6 720 2496 t
( T)1 0( NT)1 60( EN)1 65( ME)1 60( NM)1 85( ON)1 65( RO)1 70( IR)1 65( NV VI)2 100(E EN)1 125 10 720 2616 t
10 B f
( H)1 0( SH)1 78(R RS)1 128 3 1080 2736 t
10 R f
(If the)1 227 1 1440 2736 t
10 B f
( H)1 0( SH)1 78(R RS)1 128 3 1706 2736 t
10 R f
(environment is present, the remote connection will not be created via)10 2899 1 1951 2736 t
10 B f
( d)1 0( md)1 56(r rc cm)2 171 3 4889 2736 t
10 R f
(\(3\) but)1 284 1 5116 2736 t
( by)1 137(by calling the program pointed to)5 1400 2 1440 2856 t
10 B f
( H)1 0( SH)1 78(R RS)1 128 3 3014 2856 t
10 R f
( e.g.)1 181(. Use)1 250 2 3220 2856 t
10 B f
( =)1 0( H=)1 57( SH)1 78(R RS)1 128 4 3688 2856 t
10 R f
(/usr/bin/ssh to create a secure shell)5 1449 1 3951 2856 t
(connection.)1440 2976 w
(Note that this forces)3 831 1 1440 3216 t
10 B f
( d)1 0( rd)1 56( or)1 44( re ec co)3 138( dr)1 44(c cd)1 100 6 2304 3216 t
10 R f
(to create a pipe to the)5 901 1 2720 3216 t
10 B f
( \))1 0( 1\))1 33( \(1)1 50( h\()1 33( sh)1 56(r rs)1 83 6 3655 3216 t
10 R f
(program and disallows)2 928 1 3944 3216 t
10 B f
( d)1 0( rd)1 56( or)1 44( re ec co)3 138( dr)1 44(c cd)1 100 6 4906 3216 t
10 R f
(to)5322 3216 w
( makes it impossible to set up per-)7 1432( This)1 245( socket to the remote server.)5 1170(directly access the network)3 1113 4 1440 3336 t
( slows down the connection compared to a)7 1770(formance parameters and)2 1025 2 1440 3456 t
10 B f
( t)1 0( oo ot)2 83(r ro)1 94 3 4270 3456 t
10 R f
(initiated)4482 3456 w
10 B f
( \))1 0( 3\))1 33( \(3)1 50( d\()1 33( md)1 56(r rc cm)2 171 6 4845 3456 t
10 R f
(con-)5223 3456 w
(nection.)1440 3576 w
10 B f
( I)1 0( SI)1 39( CS)1 56( SC)1 72(R RS)1 128 5 1080 3744 t
10 R f
(If the)1 252 1 1440 3744 t
10 B f
( I)1 0( SI)1 39( CS)1 56( SC)1 72(R RS)1 128 5 1756 3744 t
10 R f
( not be the program)4 942(environment is present, the remote SCSI server will)7 2343 2 2115 3744 t
10 B f
( i)1 0( si)1 28( cs)1 39( sc)1 44( rs)1 39( /r)1 44( n/)1 28( in)1 56( bi)1 28( sb)1 56( /s)1 39( y/)1 28( il ly)2 78( hi)1 28( ch)1 56( sc)1 44( /s)1 39( t/)1 28( pt)1 33( op)1 56(/ /o)1 78 21 1440 3864 t
10 R f
(but the program pointed to by)5 1251 1 2346 3864 t
10 B f
( I)1 0( SI)1 39( CS)1 56( SC)1 72(R RS)1 128 5 3633 3864 t
10 R f
( that the remote SCSI server)5 1184(. Note)1 288 2 3928 3864 t
(program name will be ignored if you log in using an account that has been created with a)17 3960 1 1440 3984 t
(remote SCSI server program as login shell.)6 1771 1 1440 4104 t
9 B f
( O)1 0( SO)1 70( LS)1 50( AL)1 60( A)1 95( EE E)2 60(S SE)1 110 7 720 4272 t
10 B f
( d)1 0( rd)1 56( or)1 44( re ec co)3 138( dr)1 44(c cd)1 100 6 1080 4392 t
10 R f
(\(1\),)1462 4392 w
10 B f
( g)1 0( cg)1 50(s sc)1 83 3 1636 4392 t
10 R f
(\(7\),)1769 4392 w
10 B f
( d)1 0( md)1 56(r rc cm)2 171 3 1943 4392 t
10 R f
(\(3\),)2170 4392 w
10 B f
( h)1 0(s ss sh)2 134 2 2344 4392 t
10 R f
(\(1\).)2478 4392 w
9 B f
( S)1 0( TE ES)2 110( OT)1 60(N NO)1 135 4 720 4560 t
( S)1 0( CS)1 50( IC)1 65( TI)1 35( ST)1 60( OS)1 50( NO)1 70( GN)1 65( AG)1 70( IA)1 65(D DI)1 100 11 720 4680 t
10 R f
(A typical error message for a SCSI command looks like:)9 2333 1 1080 4800 t
(scgskeleton: I/O error. test unit ready: scsi sendcmd: no error)9 2512 1 1440 5040 t
( 20 00 00 00 00)5 665(CDB: 00)1 400 2 1440 5160 t
(status: 0x2 \(CHECK CONDITION\))3 1464 1 1440 5280 t
(Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 25 00 00 00 00 00)19 2938 1 1440 5400 t
(Sense Key: 0x5 Illegal Request, Segment 0)6 1777 1 1440 5520 t
(Sense Code: 0x25 Qual 0x00 \(logical unit not supported\) Fru 0x0)10 2701 1 1440 5640 t
(Sense \257ags: Blk 0 \(not valid\))5 1204 1 1440 5760 t
(cmd \256nished after 0.002s timeout 40s)5 1545 1 1440 5880 t
( text after the \256rst colon gives)6 1265( The)1 225( of the command.)3 735(The \256rst line gives information about the transport)7 2095 4 1080 6120 t
( from the view of the kernel. It usually is:)9 1740(the error text for the system call)6 1335 2 1080 6240 t
10 B f
( r)1 0( or)1 44( er rr ro)3 138( e)1 78( O)1 0( /O)1 78(I I/)1 67 7 4222 6240 t
10 R f
(unless other prob-)2 739 1 4661 6240 t
( a short description for the SCSI command that fails. The rest of)12 2753(lems happen. The next words contain)5 1567 2 1080 6360 t
( if there were any problems for the transport of the command over the SCSI bus.)15 3361(the line tells you)3 697 2 1080 6480 t
10 B f
( l)1 0( al)1 28( ta)1 50( at)1 33(f fa)1 83 5 5206 6480 t
( r)1 0( or)1 44(e er rr ro)3 182 3 1080 6600 t
10 R f
( was not possible to transport the command \(i.e. no device present at the requested)14 3513(means that it)2 541 2 1346 6600 t
(SCSI address\).)1 602 1 1080 6720 t
(The second line prints the SCSI command descriptor block for the failed command.)12 3439 1 1080 6888 t
( transport of)2 522(The third line gives information on the SCSI status code returned by the command, if the)15 3798 2 1080 7056 t
(the command succeeds. This is error information from the SCSI device.)10 2948 1 1080 7176 t
(J)720 7680 w
(. .)1 47 1 759 7625 t
( 3)1 1838( change: 2010/05/13)2 832( Last)1 1443(org Schilling)1 528 4 759 7680 t
cleartomark
showpage
restore
%%EndPage: 3 3
%%Page: 4 4
save
mark
4 pagesetup
10 R f
(Schily)720 480 w
10 S1 f
(\302)976 480 w
10 R f
( \( 1L \))3 225( SCGSKELETON)1 3216(s USER COMMANDS)2 950 3 1009 480 t
(The fourth line is a hex dump of the auto request sense information for the command.)15 3537 1 1080 960 t
( is only)2 313(The \256fth line is the error text for the sense key if available, followed by the segment number that)18 4007 2 1080 1128 t
(valid if the command was a)5 1191 1 1080 1248 t
10 I f
(copy)2314 1248 w
10 R f
( error message is not directly related to the current)9 2162(command. If the)2 693 2 2545 1248 t
(command, the text)2 757 1 1080 1368 t
10 I f
(deferred error)1 582 1 1870 1368 t
10 R f
(is appended.)1 507 1 2485 1368 t
( the type of the)4 651( If)1 137( the sense quali\256er if available.)5 1307(The sixth line is the error text for the sense code and)11 2225 4 1080 1536 t
(device is known, the sense data is decoded from tables in)10 2402 1 1080 1656 t
10 I f
(scsierrs.c)3519 1656 w
10 R f
( by the error)3 523( text is followed)3 683(. The)1 250 3 3944 1656 t
(value for a \256eld replaceable unit.)5 1353 1 1080 1776 t
( to the failed command and text for several error)9 2030(The seventh line prints the block number that is related)9 2290 2 1080 1944 t
(\257ags. The block number may not be valid.)7 1746 1 1080 2064 t
( set up for this command and the time that the command really needed)13 2940(The eight line reports the timeout)5 1380 2 1080 2232 t
(to complete.)1 502 1 1080 2352 t
9 B f
( S)1 0( GS)1 50( UG)1 70(B BU)1 125 4 720 2640 t
( R)1 0( HO OR)2 135( TH)1 70(A AU UT)2 190 4 720 2760 t
10 R f
(J)1080 2880 w
(. .)1 47 1 1119 2825 t
(org Schilling)1 528 1 1119 2880 t
(Seestr. 110)1 452 1 1080 3000 t
(D-13353 Berlin)1 638 1 1080 3120 t
(Germany)1080 3240 w
(Additional information can be found on:)5 1658 1 1080 3408 t
(http://cdrecord.berlios.de/private/cdrecord.html)1080 3528 w
(If you have support questions, send them to:)7 1827 1 1080 3696 t
10 B f
( t)1 0( rt)1 33( or)1 44( up pp po)3 162( su)1 56( -s)1 39( d-)1 33( rd)1 56( or)1 44( re ec co)3 138( dr)1 44(c cd)1 100 12 1080 3864 t
10 S1 f
(@ @)1 92 1 1829 3864 t
10 B f
( e)1 0( de)1 44( .d)1 56( s.)1 25( os)1 39( li io)2 78( er rl)2 72(b be)1 100 8 1921 3864 t
10 R f
(If you have de\256nitely found a bug, send a mail to:)10 2075 1 1080 4032 t
10 B f
( s)1 0( er rs)2 83( pe)1 44( op)1 56( lo)1 50( el)1 28( ve)1 44( ev)1 50( de)1 44( -d)1 56( d-)1 33( rd)1 56( or)1 44( re ec co)3 138( dr)1 44(c cd)1 100 16 1080 4200 t
10 S1 f
(@ @)1 92 1 1950 4200 t
10 B f
( e)1 0( de)1 44( .d)1 56( s.)1 25( os)1 39( li io)2 78( er rl)2 72(b be)1 100 8 2042 4200 t
10 R f
(or)1080 4320 w
10 B f
( g)1 0( ng)1 50( il ll li in)4 140( hi)1 28( ch)1 56( sc)1 44( .s)1 39( g.)1 25( er rg)2 94( oe)1 44(j jo)1 83 11 1196 4320 t
10 S1 f
(@ @)1 92 1 1799 4320 t
10 B f
( e)1 0( de)1 44( .d)1 56( er r.)2 69( fe)1 44( of)1 33( un nh ho)3 162( au)1 56( ra)1 50( fr)1 44( .f)1 33( s.)1 25( ku us)2 95( ok)1 56(f fo)1 83 15 1891 4320 t
10 R f
(To subscribe, use:)2 740 1 1080 4488 t
10 B f
( s)1 0( er rs)2 83( pe)1 44( op)1 56( lo)1 50( el)1 28( ve)1 44( ev)1 50( de)1 44( -d)1 56( d-)1 33( rd)1 56( or)1 44( re ec co)3 138( dr)1 44( cd)1 56( /c)1 44( o/)1 28( fo)1 50( nf)1 33( in)1 56( ti)1 28( st)1 33( /l li is)3 95( n/)1 28( an)1 56( ma)1 50( il lm)2 111( ai)1 28( ma)1 50( /m)1 83( e/)1 28( de)1 44( .d)1 56( s.)1 25( os)1 39( li io)2 78( er rl)2 72( be)1 44( .b)1 56( s.)1 25( ts)1 39( st)1 33( // /l li is)4 123( :/)1 28( p:)1 33( tt tp)2 89(h ht)1 89 48 1080 4656 t
10 R f
(or)1080 4776 w
10 B f
( t)1 0( rt)1 33( or)1 44( up pp po)3 162( su)1 56( -s)1 39( d-)1 33( rd)1 56( or)1 44( re ec co)3 138( dr)1 44( cd)1 56( /c)1 44( o/)1 28( fo)1 50( nf)1 33( in)1 56( ti)1 28( st)1 33( /l li is)3 95( n/)1 28( an)1 56( ma)1 50( il lm)2 111( ai)1 28( ma)1 50( /m)1 83( e/)1 28( de)1 44( .d)1 56( s.)1 25( os)1 39( li io)2 78( er rl)2 72( be)1 44( .b)1 56( s.)1 25( ts)1 39( st)1 33( // /l li is)4 123( :/)1 28( p:)1 33( tt tp)2 89(h ht)1 89 44 1196 4776 t
10 R f
(J)720 7680 w
(. .)1 47 1 759 7625 t
( 4)1 1838( change: 2010/05/13)2 832( Last)1 1443(org Schilling)1 528 4 759 7680 t
cleartomark
showpage
restore
%%EndPage: 4 4
%%Trailer
done
%%DocumentFonts: Times-Roman Times-Bold Times-Italic Symbol
%%Pages: 4