85 lines
2.8 KiB
Plaintext
85 lines
2.8 KiB
Plaintext
CDRTOOLS compiles without changes on any SCO OpenServer 5.0.4
|
|
or later installation having the SCO DevSys or GCC-2.95 and
|
|
smake-1.2a04 or later installed.
|
|
|
|
You can get pre-packaged, custom installable binaries from:
|
|
|
|
http://www.sco.com/skunkware/cdrtools
|
|
|
|
Some general notes on CDRTOOLS are available from:
|
|
|
|
http://www.sco.com/skunkware/cdrtools/SCO-NOTES.html
|
|
|
|
|
|
Limitations for CDRTOOLS-1.8 on SCO OpenServer 5:
|
|
|
|
1) SCO OpenServer 5.0.0 and 5.0.2 are unsupported!
|
|
|
|
2) There is only support for SCSI devices
|
|
|
|
3) There no support for AHA 154X scsi controllers
|
|
|
|
===================================================================
|
|
NOTE: cdrecord now supports the -scanbus option. Therefore the
|
|
old addressing methods are NO LONGER AVAILABLE !!!
|
|
===================================================================
|
|
|
|
As there is no real generic SCSI driver, cdrecord uses the pass through
|
|
ioctl of the cdrom target driver (Srom).
|
|
|
|
The correct dev= syntax on SCO Openserver 5 is:
|
|
|
|
dev=scsibus,target,lun (and scsibus is scsibus now!!!)
|
|
|
|
A sample output from cdrecord -scanbus looks like:
|
|
|
|
#cdrecord -scanbus
|
|
Cdrecord 1.8 (i686-pc-sco3.2v5.0.5) Copyright (C) 1995-2000 Jörg Schilling
|
|
Using libscg version 'schily-0.1'
|
|
scsibus0:
|
|
0,0,0 0) 'SEAGATE ' 'ST34573LC ' '5960' Disk
|
|
0,1,0 1) 'SEAGATE ' 'ST34573LC ' '5960' Disk
|
|
0,2,0 2) 'SEAGATE ' 'ST34573LC ' '5960' Disk
|
|
0,3,0 3) *
|
|
0,4,0 4) *
|
|
0,5,0 5) 'PIONEER ' 'CD-ROM DR-U06S ' '1.05' Removable CD-ROM
|
|
0,6,0 6) 'TEAC ' 'CD-R56S ' '1.0E' Removable CD-ROM
|
|
0,7,0 7) *
|
|
|
|
The first column showing the triple x,y,z tells you the address to use.
|
|
|
|
As you can see the TEAC CD-R56S CD-Writer does have the following address:
|
|
|
|
dev=0,6,0
|
|
|
|
===================================================================
|
|
THE OLD ADDRESSING IS NO LONGER AVAILABLE!
|
|
|
|
PLEASE ADJUST YOUR /etc/default/cdrecord FILES!
|
|
===================================================================
|
|
|
|
Running cdrecord with the old address method will result in an error!
|
|
|
|
#cdrecord dev=/dev/rcd1:6,0 -inq
|
|
Cdrecord 1.8 (i386-pc-sco3.2v5.0.5) Copyright (C) 1995-2000 Jörg Schilling
|
|
scsidev: '/dev/rcd1:6,0'
|
|
devname: '/dev/rcd1'
|
|
scsibus: 0 target: 6 lun: 0
|
|
cdrecord: Invalid argument. Open by 'devname' no longer supported on this OS. Cannot open SCSI driver.
|
|
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
|
|
|
|
|
|
MAKE SURE YOU HAVE MEDIA IN YOUR CD-ROM DEVICES, SO THAT CDRECORD CAN
|
|
OPEN THE DEVICE FOR PASS-THROUGH ACCESS!
|
|
|
|
|
|
To compile cdrtools, you need 'smake' version 1.2a04 or later from:
|
|
|
|
ftp://ftp.sco.com/skunkware/osr5/vols
|
|
|
|
|
|
Please make sure you use smake-1.2a04 or later, cause smake-1.2 versions
|
|
before a04 will coredump on the compilation of cdrtools on OpenServer.
|
|
|
|
|